garso stiprintuvai HERTZ

Dimensions, mm 240x548x55
channels 1
Power (RMS) @ 14.4V
@ 4 ohm 1 x 700W
@ 2 ohm 1 x 1400W
@ 1 ohm 1 x 2300 W
HP LINK @ 4ohm 1 x 2300 W
HP LINK @ 2 ohm 1 x 4000W
Crossover 50 - 350 Hz @ 24dB
THD @ 1k Hz 4Ohm 0.05%
Ratio S / N weighted dBA. 87dB @ 1V
Conv. Damped. 100k Hz @ 100 4Ohm
Rms Power 4 ohm, 1% THD + N, 14,4, 700 watts x 1 book:
Ratio S / N ratio rel. 1 W O 58 dBA

Dimensions, mm 280x588x55
channels 1
Power (RMS) @ 14.4V
@ 4 ohm 1 x 2100Vt
@ 2 ohm 1 x 3200Vt
@ 1 ohm 1 x 2300 W
HP LINK @ 4ohm 1 x 3200 W
HP LINK @ 2 ohm 1 x 6600 Tues
Crossover 50 - 350 Hz @ 24dB
THD @ 1k Hz 4Ohm 0.059%
Ratio S / N weighted dBA. 87dB @ 1V
Conv. Damped. 100k Hz @ 100 4Ohm
Rms Power 4 ohm, 1% THD + N, 14,4 In 1050 watts x 1 book:
Ratio S / N ratio rel. 1 W O 58 dBA

Dimensions, mm 240x548x55
Channels 2 - 1
Power (RMS) @ 14.4V
@ 4 ohm 2 x 370W
@ 2 ohm 1 x 1200W
@ 1 ohm 1 x 600W
Crossover Shunt (Bypass) Yes
HF crossover, Hz 40 - 150 Hz @ 12 dB
LF crossover, Hz 40 - 150 Hz @ 12/24dB
THD @ 1k Hz 4Ohm 0.04%
Ratio S / N weighted dBA. 94dB @ 1V
Conv. Damped. 1k Hz @ 100 4Ohm
Rms Power 4 Ohm, 1% THD + N, 14,4 370 watts x 2 books
Ratio S / N ratio rel. 1 W O 70 dBA

Born to new world records for special events at the maximum volume (SPLs, SPL), 2-channel bass amp is far beyond the usual boundaries and dimensions of the structure, and its power in a special mode of operation can not exceed 15 kW (RMS). This is a formidable weapon to win aimed only at the highest place on the podium avtozvukovyh athletes, and at the same time - the personification of limitless power of the best examples of modern audio technology.

The amplifier can operate at supply voltages from 8 to 18, its huge power supply unit is equipped with eight massive transformers and several dozen high-voltage capacitors, increased capacity and field (MOSFET) transistors, designed to work with currents up to 160 amps each. To minimize the loss of power when on battery is a special technology Direct CurrentO, which uses four power cables, directly connected via a thick copper bus to the amplifier board. Mechanical layout of nodes housing circuitry and electronic components used sections have exceptional reliability, their limiting capabilities far exceed the most extreme of the achievable in practice values. In particular, built on 20 field (MOSFET) transistors 190 A / 360 V output stage can operate with total current up to 3800 A.

Characteristics MP 15K UNLIMITED can still increase - almost infinitely - by use of multiple amplifiers in a coherent sound system. Thanks to the Hertz SPL Stack SystemO amplifiers can be combined into a single array, the power will grow as many times as it amps. In this case attached to each other vertically or horizontally by means of special durable metal clips, and set the leading (Master) amplifier will be automatically transmitted to the slave (Slave) amplifiers.

Main technical data:
Power (stereo, RMS, 12 V, 4/2/1 ohms) 2h1000/2000/3000 W
Power (bridged mode, RMS, 12 V, 4/2/1 ohms): 8000/6000/4000 W
Power (stereo, RMS, 14,4 V, 4/2/1 ohms) 2h1500/1800/4500 W
Power (bridged mode, RMS, 14,4 V, 4/2/1 ohms) 5600/9000/12000 W
Power (stereo, RMS, 16 V, 4/2/1 ohms) 2h1800/3400/5500 W
Power (bridged mode, RMS, 16 V, 4/2/1 ohms) 6800/11000/15000 W
Power (stereo, RMS, 18 V, 4/2/1 ohms) 2h2300/4400/6100 W
Power (bridged mode, RMS, 18 V, 4/2/1 ohms) 8800/12000/15500 W
Power supply: 8 - 18
Frequency range (-3 dB): 10 - 500 Hz
S / N Ratio (1): 69 dB (A-vzvesh.)
THD (100Hz, 4 ohms): 0.15% (A-vzvesh.)
Damping Factor (100Hz, 4 ohms):> 950
Input sensitivity: 0,3-7,0 B
Input Impedance: 15 ohms
Low-pass filter (on / off): 40-150 Hz, 24 dB / oct
Subsonic filter frequency (subsonic, on / off): 10-50 Hz, 24 dB / oct
Dimensions (LxWxH): 830x323x68, 5 mm
Weight: 25.5 kg

Representatives from Energy Power Index "X" increased capacity differ. 2-channel amplifier EP 2 X is similar in equipping the base model EP 2, but offers 220 watts per channel in stereo and 700 watts - in bridged mode with a typical 4-ohm load. As with any amplifier lineup Energy Power, EP 2 X is made fresh to hi-tech design and provides excellent sound quality. As a representative of audio from beyond the standard framework of energy potential, EP 2 X retains a reasonable price and is exceptionally rugged design. The amplifier is built on best in class components and is equipped with enhanced cooling system. Special protective covering anthracite casing is resistant to scratches and other mechanical damage, and increases the effective area of ​​heat dissipation. Patented Speaker-In & ART ™ (Auto Turn on / off) makes it easy to connect to the source signal is not equipped with a linear output for the amplifier, such as full-time head units. In this case connects to the amplifier outputs to the speakers of the source signal and automatically in the presence of the desired signal.

Number of channels: 2
Class gain: AB
Power (RMS, 14,4 B, THD <1%): 2 x 220 W / 2 x 350 W (4 / 2 Ohm)
Power (bridged mode, RMS, 14,4 V, 4 ohms, THD <1%): 700 W
Frequency range (-3 dB): 7 - 60000 Hz
S / N Ratio (1): 100 dB (A-vzvesh.)
THD (100Hz, 4 ohms): 0.05%
Damping Factor (100Hz, 4 ohms): 130
Sensitivity line-level inputs (RMS): 0,3 - 5,0 B
The resistance of line-level inputs: 15 kilohms
High-sensitivity input (RMS): 1,4 - 24
Crossover: off, low pass / high pass 40-400 Hz, 12 dB / oct
Lifting scheme bass: 0 ... 12 dB, 45 Hz
Fuse: A 3h30
Dimensions (LxWxH) mm 450x240x54
Weight: 4.77 kg

Representatives from Energy Power Index "X" differ significantly increased capacity. 4-Channel Amplifier 4 X EP on equipment similar to the basic model of EP 4, but with 100 watts per channel in stereo and 320 watts - a bridged pair of channels at any standard 4-ohm load. As with any amplifier lineup Energy Power, EP 4, X is made fresh to hi-tech design and provides excellent sound quality. As a representative of audio equipment with high energy potential, EP 2 X retains a reasonable price and is exceptionally rugged design. The amplifier is built on best in class components and is equipped with enhanced cooling system. Special protective covering anthracite casing is resistant to scratches and other mechanical damage, and increases the effective area of ​​heat dissipation. Patented Speaker-In & ART ™ (Auto Turn on / off) makes it easy to connect to the source signal is not equipped with a linear output for the amplifier, such as full-time head units. In this case connects to the amplifier outputs to the speakers of the source signal and automatically in the presence of the desired signal.

Power (stereo + bridge, RMS, 14,4 V, 4 ohms, THD <1%) + 2x100 1h320 W;
Power (stereo + bridge, RMS, 14,4 B, THD <1%) 2h160 W (2 ohms) + 1h320 W (4 ohms);
Power (bridge + bridge, RMS, 14,4 V, 4 ohms, THD <1%) 2h320 W;
High-sensitivity input (RMS) 1,4 - 24;
Resistance to high-level inputs 470 ohm;
Crossover (channels 1-4) is disabled, LPF / HPF 40-400 Hz, 12 dB / oct;
Lifting scheme bass (channels 3-4) 0 ... 12 dB, 45 Hz