MOSCONI GLADEN PICO 6|18 DSP

Name: MOSCONI GLADEN PICO 6|18 DSP
SKU: 2234-1-1-1
Price: 649.00 EUR
Availability: InStock

€649.00 vnt

žmonių šiuo metu tai žiūri

Automobilinis 6-ių kanalų D klasės labai mažas garso stiprintuvas su DSP

Liko vnt.

Garantuotas saugus apmokėjimas

NEMOKAMAS PRISTATYMAS LIETUVOJE UŽSAKIUS VIRŠ 99 EUR
PREKIŲ PRISTATYMAS LIETUVOJE PER 2 - 3 D.D. Siuntimas ir grąžinimas

1-14 d.

Produkto kodas: 2234-1-1-1 Kategorijos: Automobilių technika, Stiprintuvai ir jų priedai, Stiprintuvai su DSP

Aprašymas

Mosconi Gladen Pico 6|8 DSP – automobilinis 6-ių kanalų D klasės labai mažas garso stiprintuvas su DSP.

The Mosconi Pico amplifiers embody the automotive hifi future. The compact housings combine state-of-the-art high-speed digital amplifiers, smart power supplies and innovative DSP functions.

This results in high power efficiency, which is a basic requirement for modern and also electric vehicles.

The DSP versions (Digital Signal Processor) offer numerous equipment and expansion options, such as Bluetooth audio streaming in High Resolution Audio format.

With the optionally available OEM cable sets, a perfect and non-destructive integration of the Mosconi Pico’s in your car is possible.

OVERVIEW MOSCONI PICO 6|8 DSP

Perfect OEM integration:

Powerful DSP amplifier optimized for factory radio use. Six analog inputs up to 30 V, flexible routing, 3 x input EQ and delay. With 4 x 50 Watts + 2 x 90 Watts ideal for active and semi-active systems, as well as classic front + rear + sub application. With two digital inputs (SP-Dif and BT+) and two processed line outs ready for the future.

Transducerless high-speed PWM power amplifiers:

High-efficiency PWM output stages with the fastest carrier frequency in the world today (> 2 MHz). The modulation is done without DAC directly from the 48 kHz TDM signal of the DSP, thus the noise floor goes to zero and THD+N ~ 0.02 % / 1 W.

INPUT:

4 x analog inputs balanced (high-level) up to 30 V
2 x analog inputs switchable high level / low level)
1 x digital input SP-Dif optical (8 kHz – 96 kHz sampling rate)
1 x bluetooth port with SP-Dif – TTL (8 kHz – 96 kHz, e.g. for Mos_BTS bluetooth streaming module)
Bluetooth extended digital audio port (BT+)
(flexible 8 kHz – 384 kHz synchronous digital input for audio sources with 2 – 16 channels, direct DSP access without jitter, e.g. for MOS BTS-LD4C BT streaming module or extended analog inputs)

DSP:

912 MHz, 32-bit audio port, 64-bit core
Double precision 56 Bit filter calculation
6144 SIMD instructions per sample at 48 kHz
ASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR

CONTROL:

1 x remote connector (analog, for RTC.2 roti remote control)
1 x bluetooth control port (Connection MOS-BT3.0 (app control), RC-Can (CAN-Bus control), MOS_USB2.0 (programming dongle)
1 x remote out, 1 x remote in, auto remote for high level connection
Connections with MOLEX® plug contacts
Very small size with low heat generation, best suited for installation behind panels

SOFTWARE:

3 x 9 band parametric input EQ (de-equalizing)
6 x input delay 0 – 3 ms / 0.01 ms (de-delay)
10 x input level control digital (signal conditioning)
Flexible mixer for signal routing
(Side separated, can sum and subtract, 10 inputs to 4 x 2 output groups)
6 x 30 band or 4 x 30 band + 2 x 15 band group EQ
(parametric, relative phase remains stable)
8 x 10 band output filters
Highpass / lowpass / highshelf / lowshelf / notch / allpass 1st + 2nd order / speaker-EQ)
8 x speaker-delay 0 – 12 ms, 0,02 ms
8 x speaker phase switch