+370 600 47347 info@soundservice.lt P. Lukšio g. 18, Vilnius



2 kanalų galios stiprintuvas.

1,599.00 vnt


Share this product






The XPA-DR2 is a two channel power amplifier, and features two high-powered fully-differential amplifier channels, powered by a massively powerful 3 kW switch-mode power supply. The XPA-DR2 provides superb dynamics, incredible resolution, and absolute control. If you’re looking for the very best sound quality with virtually endless reserves of power against a jet black noise floor, this amplifier is for you. The XPA-DR2 delivers 550 watts RMS into 8 Ohms, and 800 watts RMS (that’s 1 kW) into 4 Ohms, both channels driven, with less than 0.1% THD.


A new approach to amplifier design.

When we set out to design our ground-breaking new X-Series amplifier line, we analyzed everything in every amplifier we’ve ever made; from front to back; inside and out. In doing so, we discovered several areas where our years of experience, and recent advances in technology, enabled us to make significant improvements on our previous amplifier designs. After carefully weighing all the pros and cons, we kept the best features of our original designs, added a new set of features, technologies, and improvements. The result became the foundation of our new line of audiophile amplifiers; the modular X Series Amplifiers.

Our XPA-DR amplifiers are all built on the same chassis, and features a special version of our massively over designed, heavy duty, fully regulated, switch mode power supply (SMPS). It has been optimized to supply power to our new high-powered fully-differential amplifier modules. The chassis can be populated with a single channel to create a true monoblock, with two channels – to power a superb stereo system or the front main speakers of a surround sound system, or with three channels – to power the front three channels of a no-holds-barred surround sound system. (The system is fully modular, so you can add high-powered fully-differential channels as you need them – up to a total of three.)


More power, Scotty!

With audio amplifiers, everything starts and ends with power. Of course, the sound quality is critical, and that’s where really well designed amplifier circuitry comes in. However, if your power supply isn’t up to the task, even the best amplifier circuitry in the world won’t live up to its full potential.

All of our XPA-DR amplifiers utilize a massive regulated switch mode power supply. This sophisticated and intelligent monster, a special version of the power supply used in our XPA Gen3 amps, is capable of delivering over 3 kW (that’s 3 kilowatts) of clean audiophile grade power with extremely high efficiency and absolute reliability.

Our advanced power supply design combines the dynamic capabilities of classic transformer-based designs with the efficiency and careful regulation of modern switch mode designs. Big heavy transformers and giant filter capacitors are rendered obsolete; they just can’t compete. It’s the power supply of the future – perfected, and it’s here today.


Let’s talk amplifiers

Our XPA-DR amplifier modules amplifiers use the same basic circuit topology as our legendary XPR series amplifiers. A unique differential input stage, with a cross-linked current source, drives a balanced voltage amplification stage, and this advanced input circuitry delivers an incredibly accurate and pure audio signal to the complementary, fully discrete output stage. A pair of these modules work together in perfect synergy to power a single channel of one of our new fully balanced, fully differential, XPA-DR amplifiers. Together they deliver a holistic, natural, and powerful listening experience. Low-level musical details and dialogue emerge from a deep black background; musical crescendos are delivered with both stunning impact and precision. The wide bandwidth, low distortion performance of the XPA-DR reveals every nuance of your high- resolution sources, and it has plenty of power to drive even difficult loudspeakers with absolute authority and control.

The bottom line is that our new XPA-DR amplifiers will deliver the full power and majesty of today’s high definition movie and music sources, with perfect control, and without a hint of strain, or the tiniest loss of detail. We’re talking about real-world power and fidelity that you can immediately hear and appreciate. No excuses, no compromises, and no double-talk.


The Heart of Your System

Here at Emotiva, we believe that your power amplifier is the heart of your audio or home theater system. Our new XPA-DR amplifiers aren’t just about power and impact. Behind the massive power supplies and big heat sinks are audiophile-grade amplifier modules, built using premium components, the finest materials, and the latest manufacturing technologies – all combined to bring you truly world-class products. All of the components in our XPA-DR amplifiers are carefully engineered and designed to work together as a stunningly capable, reliable, refined, and flexible system. We’ve listened to both our customers and our gear – and we like what we hear.

And, as with all of our XPA series amplifiers, they’re Designed, Assembled, and Tested in the U.S.A.



● True audiophile-quality sound – as with all of our amplifiers, the XPA-DR2 was designed first and foremost to sound superb in all types of audio systems.

● High-powered, fully-differential, low distortion amplifier design – delivers massive dynamics with smooth precision, offering superbly detailed sound and incredibly natural imaging – without a trace of harshness or strain.

● Optimized Soft-Switch Class H™ power supply topology – delivers improved efficiency without compromising audio performance.

● Switched Mode Power Supply (SMPS) – offers all of the performance of a traditional linear power supply, while improving efficiency and reliability, and reducing overall weight.

● Fully modular construction – allows you add a third channel to your XPA-DR2 later if you decide to.

● Top quality parts and construction throughout – promise years of reliable service.

● Totally stable – designed for use in the real world, with real speakers.

● Heavy steel 4RU chassis with milled aluminum faceplate – provide strength and rugged good looks.

● Gold plated five-way speaker binding posts with clear shields – allow you to use a wide range of speaker cables with bare wires, lugs, or banana plugs.

● Solid machined gold-plated RCA input connectors – provide a reliable connection with a wide variety of audio interconnects.

● Choice of balanced or unbalanced inputs – independently controlled by high-reliability metal toggle switches to ensure long service life.

● Remote trigger input and output – allows the XPA-DR2 to be turned on by trigger-enabled equipment, and to activate other trigger-enabled equipment.

● Audiophile-grade fault protection – entirely transparent under normal conditions, yet protects the amp and your other equipment from all common fault conditions.

● World compliant AC line voltage operation – the XPA-DR2 operates on any line voltage between 100 VAC and 250 VAC 50/60Hz and is protected from faults by a rugged resettable circuit breaker.

● Standard IEC power inlet – fits all standard and audiophile IEC power cables.

● Full five-year warranty – ensures that you’ll be able to enjoy your XPA-DR2 amplifier for years to come.



● Modular Construction

Each XPA-DR amplifier is comprised of a heavy-duty chassis, which houses the oversized power supply, and up to three sets of amplifier modules (each channel requires a set of two modules). The XPA-DR can be purchased with up to three high-powered fully-differential amplifier channels installed, and additional channels may be added later (up to a total of three). The front panel display and protection system are designed to work with the maximum number of channels, and so need not be updated when the XPA-DR is expanded; on the rear panel, slots not occupied by amplifier modules will be covered with protective cover panels.

Note: To ensure that additional amplifier channels are installed properly, and function to our specifications, additional amplifier modules must be installed by Emotiva, or by your local authorized Emotiva service representative.

● Circuit Topology

A fully modular, fully differential, fully balanced audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.

● Power:

550 watts RMS into 8 Ohms at <0.1% THD

800 watts RMS into 4 Ohms at < 0.1% THD

● Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)

● Broad Band Frequency Response: 20 Hz to 50 kHz +0/-2 dB

● THD + noise: < 0.008%; at 100 watts RMS; 1 kHz; 8 Ohms ● Signal to Noise Ratio (8 Ohm load): > 120 dB; ref FTC rated power; unbalanced input (A-weighted).

> 96 dB; ref 1 watt; unbalanced input (A-weighted).

● Minimum Recommended Load Impedance:

4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads.

● Damping Factor (8 Ohm load): > 500.

● Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.

● Power Supply: High efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

● Input Sensitivity (for rated power; 8Ohm load): 2.1 V.

● Gain: 29 dB.

● Input Connections: Unbalanced (RCA); balanced (XLR); one each, per channel, user selectable.

● Input Impedance:

33 kohms (balanced).

23.5 kohms (unbalanced).

● Trigger:

Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.

Trigger Output: 12 VDC; can drive any load up to 120 mA.

● Power Requirements: Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).

● Front Panel Controls and Indicators:

Standby; push button (halo ring changes color to indicate Standby or On).

Status LEDs; one per channel; blue.

Status LEDs change to red to indicate a fault condition.

● Rear Panel Controls:

AC Power switch; rocker switch (switches AC main power).

Status LEDs switch; disables front panel Status LEDs and dims Standby button halo.

Input selector switches (one per channel); metal toggle switches; select between balanced and unbalanced inputs.

Circuit Breaker; press button to reset circuit breaker.

● Protection:

The XPA-DR2 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

● Dimensions:

17” wide x 8” high x 19” deep (unboxed; including feet).

17” wide x 7” high x 19” deep (unboxed; without feet).

24-1/2” wide x 12” high x 24-3/4” deep (boxed).

● Weight:

42.5 lbs (unboxed)

47.5 lbs (boxed)



USB skaitymas


Jungtys (įėjimai)

Analoginis (RCA), XLR

Bevielis muzikos siuntimas


WI-FI valdymas






Kanalų skaičius






Phono įėjimas


Subwoofer išėjimas


Sinchronizavimas su TV (ARC)


Dėl Jus dominančios prekės pristatymo, kreipkitės info@soundservice.lt arba telefonu +370 600 47347.

Dėl Jus dominančios prekės pristatymo, kreipkitės info@soundservice.lt arba telefonu +370 600 47347.

instagram default popup image round
Follow Me
502k 100k 3 month ago